top of page

Tec Startup Garage: BATCH 2 2021B

Public·117 members
Joshua James
Joshua James

Learn How to Calibrate the Laser of a PS2 Fat in Minutes

How to Calibrate the Laser of Your PS2 Fat: A Step-by-Step Tutorial

If you own a PS2 Fat console, you may have encountered some problems with reading discs. This can be caused by a misaligned or dirty laser that needs to be calibrated. In this tutorial, we will show you how to calibrate the laser of your PS2 Fat using some simple tools and steps.



What You Need

Before you start, make sure you have the following items:

  • A PS2 Fat console

  • A Phillips screwdriver

  • A small flathead screwdriver

  • A cotton swab

  • Some rubbing alcohol

Step 1: Open the Console

The first step is to open the console and access the laser. To do this, you need to remove the screws on the bottom of the console. There are 10 screws in total, but some of them are hidden under rubber feet or warranty stickers. You can use a small flathead screwdriver to pry them off.

Once you have removed all the screws, flip the console over and lift the top cover. Be careful not to damage any wires or connectors inside. You should see the disc tray and the laser assembly.

Step 2: Clean the Laser

The next step is to clean the laser lens with a cotton swab and some rubbing alcohol. This will remove any dust or dirt that may interfere with the laser beam. Gently wipe the lens with the cotton swab until it is clean and dry. Do not apply too much pressure or you may damage the lens.

Step 3: Adjust the Laser

The final step is to adjust the laser potentiometer, which controls the power of the laser beam. This is a small metal dial located on the back of the laser assembly. You can use a small flathead screwdriver to turn it clockwise or counterclockwise.

The goal is to find the optimal setting that allows your console to read discs without skipping or freezing. This may require some trial and error, as different discs may have different requirements. A good starting point is to turn the dial about 45 degrees counterclockwise from its original position.

After adjusting the dial, put a disc in the tray and close the cover. Turn on your console and test if it can read the disc properly. If not, repeat the process until you find a satisfactory setting.

Step 4: Reassemble the Console

Once you have found the best setting for your laser, you can reassemble your console. To do this, simply reverse the steps you took to open it. Make sure to put back all the screws, rubber feet, and stickers in their original places. Be careful not to damage any wires or connectors inside.

Step 5: Enjoy Your PS2 Fat

Congratulations! You have successfully calibrated the laser of your PS2 Fat. You should now be able to play your favorite games without any disc reading issues. If you encounter any problems in the future, you can always repeat this tutorial and adjust the laser again.

Tips and Warnings

Here are some tips and warnings to keep in mind when calibrating the laser of your PS2 Fat:

  • Do not calibrate the laser too often or too much, as this may shorten its lifespan or damage it permanently.

  • Do not use any abrasive or corrosive materials to clean the laser lens, as this may scratch or ruin it.

  • Do not touch the laser lens with your fingers, as this may leave fingerprints or oils that may affect its performance.

  • Do not expose the laser lens to direct sunlight or bright lights, as this may harm it.

  • Do not attempt this tutorial if you are not confident in your skills or if your console is still under warranty, as this may void it or cause further damage.


In this tutorial, we have shown you how to calibrate the laser of your PS2 Fat console using some simple tools and steps. This can help you fix any disc reading problems and enjoy your games without any interruptions. We hope you found this tutorial helpful and informative. If you have any questions or feedback, please leave a comment below. Thank you for reading! a27c54c0b2


Welcome to the group! You can connect with other members, ge...
Group Page: Groups_SingleGroup
bottom of page